STANDARD ROLL REINFORCING MESH WELDING MACHINES
TECHNICAL DATA
Standard machine consists of the following elements:
1. Spool holders 16 pieces
2. Section for drawing and straightening longitudinal wires 16 sets
3. Longitudinal wire traction block
4. Fine straightening of the longitudinal wire (16 sets)
5. Stepper motor (step regulation 100-250 mm)
6. Automated feeder of the transverse wire
7. Welding block
8. Block (shears) for cutting – automated
9. Winder
10. Control unit
1. Spool holders 16 pieces
2. Section for drawing and straightening longitudinal wires 16 sets
3. Longitudinal wire traction block
4. Fine straightening of the longitudinal wire (16 sets)
5. Stepper motor (step regulation 100-250 mm)
6. Automated feeder of the transverse wire
7. Welding block
8. Block (shears) for cutting – automated
9. Winder
10. Control unit
Specification
| Function | VMR |
|---|---|
| Wire diameter | od 3,0 mm do 5,5 mm |
| Accurate spacing of longitudinal wires | 100 do 250 mm |
| Accurate spacing of transverse wires | 100 do 250 mm |
| Width of the final product | 2000 mm i 2400 mm |
| Roll length | 10 m do 45 m |
| Machine speed | 60 - 90 r.p.m. |
Spare Parts Catalog
Are you interested in this machine?
Send us a message and we will contact you as soon as possible
